I recently bought a BK Monolith+ DF sub and wanted to recalibrate my setup using the Audyssey XT32. At the calibration start it asks to set the gain of the sub to 75db..if I do that I need to set the gain at almost zero for it to reach 75db...so my question is ...is this normal? On the sub there is also a high and a low level gain. I have almost no bass after callibration even if I set my center and L/R speakers from 40hz to 60hz crossover, LFE is set @ 120hz and also on the sub, phaze is set to 0.
I would appreciate some help as I allready used a guide to setup my system, but there is no mention on the volume setting of the sub in XT32!