denon 4311 has 40hz, 60hz xover points. does audyssey pro allow 50hz?

So I can hear a dramatic difference with music between a 40hz xover point and a 60hz point.  The 40hz isn't giving the subs enough, and the 60hz is too much bump.  Does the audyssey pro kit allow a 50hz xover point?  Or am I stuck with the limited xover points on the 4311?  Thanks.  Zac.

Zac Vasilinda -
Have more questions? Submit a request

4 Comments

Date Votes
  • 0
    Avatar
    Audyssey Labs

    Hi Zac,

    The Pro Kit gives you a selection of crossovers based on the smoothness of the blend.  However, the crossover values are limited by what the AVR supports because they ultimately have to run in the AVR.  So, if the AVR has no 50 Hz setting then you won't be able to select it with the Pro software.

  • 0
    Avatar
    Zac Vasilinda

    I feared that might be the case.  Thanks Chris!

  • 0
    Avatar
    Zac Vasilinda

    I feared that might be the case.  Thanks Chris for the prompt reply!

  • 0
    Avatar
    Zac Vasilinda

    oops double post.  triple post.

Article is closed for comments.